Microland (Shanghai) Limited
Call us on:+86-21-64648895    E-mail: info@microland-tape.com
News
Home > News > Content
The Use And Characteristics Of Film Tapes
Microland (Shanghai) Limited | Updated: Aug 25, 2017

The use and characteristics of Film Tapes
Film Tapes, as the name suggests is to foam, that is, foam material for the substrate, double or single coated with high viscosity hot melt adhesive, oil, made of materials from the isolation made of Film Tapes, the market more Mostly double-sided Film Tapes. Film Tapes because of its foam material as the substrate, in addition to the inherent adhesion of the Film Tapes, but also because of the performance of foam material has given its shock and noise reduction, fill the gap test on the rough surface, waterproof, compensation for different materials thermal expansion Differences and other performance.
Film Tapes Uses: Film Tapes is widely used in electrical and electronic products, mechanical parts, all kinds of small household appliances, mobile phone accessories, industrial instruments, computers and peripherals, auto parts, audio and video equipment, toys, cosmetics, craft gifts, medical equipment , Electric tools, office stationery, shelves display, home decoration, acrylic glass, ceramic products, transport industry insulation, paste, seal, anti-skid and buffer shock packaging.
Film Tapes characteristics:
1, with excellent sealing, to avoid gas release and atomization.
2, excellent anti-compression deformation, that is flexible with durability, can ensure that accessories have long-term shock protection.
3, with flame retardant, does not contain harmful toxic substances, will not remain, will not pollute the equipment, the metal is not corrosive.
4, can be used in a variety of temperature range. From minus 20 degrees Celsius to 90 degrees range can be used.
5, the surface has excellent wetting, easy to bond, easy to make, easy to punch cut.
6, holding sticky for a long time, stripping large, early sticky strong, good weather performance!
7, waterproof, anti-solvent, high temperature, in the curved surface has a good service.
Daily life, almost every family will buy three or four rolls of Film Tapes to do the home, often because of the use of less, so will retain a few months to be used again, but found that Film Tapes is not sticky, or Film Tapes overflow plastic, Or Film Tapes deformation is not easy to use, and this is why?
  Anything has a shelf life, Film Tapes is no exception, the Film Tapes over the shelf life, naturally will be a problem. So how long is the standard shelf life of the Film Tapes Film Tapes?
The industry generally use two-year shelf life, our company gives the shelf life is stored at room temperature for 20 months, especially for wholesale links and long inventory cycle wholesalers.
  Basically, all the Film Tapes manufacturers are given the shelf life are dry environment at room temperature as a prerequisite, followed by the procurement of adhesive varieties and quality. I used the raw materials used in all the materials used in Sinopec and other genuine raw materials, trustworthy. If you buy the sea Xiangxing Film Tapes home, the requirements of the sticky is not very high, you do not have to worry about the shelf life of the problem, even if the Film Tapes is assured to use.
Life, often encountered a lot of Film Tapes residue, how rub can not erase, how to scratch is also difficult to clean, can be said to be extremely difficult to clear, then how can the perfect solution to the Film Tapes residue? Below Xiaoxiang Xiaobian and we talk about the perfect solution to the Film Tapes residual small coup.
 1. Use the new Film Tapes attached to the residue above, and then forced to tear off, so you can get rid of the residue, and very clean, you can repeat several times.
 2. The use of alcohol, acetone, edible vinegar, one of the essential oils, completely wet the Film Tapes residue, you can use a towel or blade easy and effective easy and effective Film Tapes residue.
 3. The use of hair dryer hot blowing, this effect is very good at home is also very convenient, each person basically have a hair dryer, regardless of the sticker glass, plastic, wood, metal can, first with a hairdryer back and forth blowing a few times, then tear Open a small side, along the tearing direction while slowly tearing side with a hot tube hot blowing, the effect is very good.
 4. Apply the toothpaste evenly to the residual surface of the Film Tapes and wipe it with a soft cloth after 5 minutes. For the Film Tapes more than the residue, you can double the use of toothpaste to remove.

Product Categories

Fast Track


Copyright © Microland (Shanghai) Limited